Over 15 Years Experience Neodymium Magnet Manufacturer
8 Years Vertified Golden Supplier
100% Satisfaction Guaranteed On Quality
Samples and Trial Orders Are Most Welcome
High Performance Magnetic Filter Bar used Magnetic Grids
| Type |
Permanent Sintered Neodymium Magnets/Rare Earth Magnet |
| Material |
NdFeB |
| Shape |
Block,Bar,Cube,Disc,Ring,Cylinder,Ball,Arc,Trapezoid,etc |
| Size |
Customized according to customer's request |
| Coating |
Ni,Zn,Epoxy,Parylene,Gold,Passivated,etc |
| Density |
7.5-7.6 g/ cm³ |
| Delivery date |
7-10 days for common samples,15-20 days for mass production |
Magnetic Grade
&
Working Temperature |
Magnetic Grade |
Working Temperature |
| N35-N45 |
80ºC (176ºF) |
| N48-N52 |
60ºC (160ºF) |
| 35M-52M |
100ºC (212ºF) |
| 33H-50H |
120ºC (248ºF) |
| 33SH-45SH |
150ºC (302ºF) |
| 30UH-40UH |
180ºC (356ºF) |
| 28EH-38RH |
200ºC (392ºF) |
| 28AH-33AH |
220ºC (428ºF) |
Magnetic tube (aka magnetic bar) is several pieces of neodymium magnets assembled into steel bar, the standard diameters are D18, D20, D25, D32, D35, D40mm, the frame and tube material is 304 or 316L stainless steel, it is good corrosion resistance and no pollution, the surface can be fine polished and full welded to meet food grade or pharmacy application.
The strong magnetic tube is used for removing ferrous objects, like chips, nuts, screw, nail, and other ferrous scraps from the production flow or daily use. It can be installed at a certain point in the production flows to catch and separate the ferrous particles. It has been widely used in the chemical industry, medicines, sanitation, plastics, textile, smelting, machinery and food stuffs, etc. to ensure the quality of the products and the longevity of the equipment and facilities.
We are very experienced in producing the magnetic tube and ready to supply a most suitable one for your application.
Why choose us
1.FLOW CHART
From the raw material to finished product,
all the processes are completed in our factory,
and are under our strict control.
2. QUALITY CONTROL
1> Magnet will be inspected strictly during the production of every process.
2> Every magnet will have a certificate before delivery.
3> Magnetic Flux report and Demagnetization Curve can be offered according to request.
3. CORE ADVANTAGE
1> Cutting-Edge Technology
Self-Developed Key Equipment, Unique Manufacturing Process, Energetic R&D Team.
2> Full Scale Production
Capacity 200 tons, Specialized Factories.
3> The Integrated Industry Supply Chain.
4> Outstanding Product.
1>
High performance: N54 N52M N50H 46SH 42UH 38EH 33AH etc
2>
High Working Temperture:The AH series with 40KOE super-high coercive force can replace Smco magnets in most applications
3>
High Consistency
The Cpk of Remanence (Br) and Intrinsic Coercive Force (Hcj) are much higher than 1.67.
The Consistency of the surface magnetic field and magnetic flux can be controlled at +/-1%.
4>High Anti-Corrosion
The salt spray test and humidity heat test of the high
anti-corrosion coating Nickel+Copper+Epoxy is typically more than 500 hours.
5.Low Weight Loss
PCT: 130°C, humidity 100%, vapor pressure 2.7 bar,
20 days, average low weight loss <2 mg/cm2.
4. DEMAGNETIZATION CURVE
5. APPLICATION
The sintered neodymium-iron-boron (NdFeB) permanent magnet is widely used in
permanent magnet servo motor, permanent magnet elevator tractor, wind driven generator,
permanent magnet linear motor, permanent magnet step motor, permanent magnet micromotor,
permanent magnet oil field motor, permanent magnet transducer, permanent magnet loudspeaker,
electronic component, medical equipment and so on
Magnetization Direction
Common direction of magnetization showed in picture bellow:
1> Disc, cylinder and Ring shape magnet can be magnetized Axially or Diametrically.
2> Rectangle shape magnets can be magnetized through Thickness, Length or Width.
3> Arc shape magnets can be magnetized Diametrically, through Width or Thickness.
Special direction of magnetization can be customized as required.
){kind=link}